This submit and photographs could comprise Amazon or different affiliate hyperlinks. If you buy one thing by way of any hyperlink, I could obtain a small fee at no further cost to you. Any provides used could also be given to me freed from cost, nonetheless, all tasks and opinions are my very own.
Let’s chat about discovering Cricut hat press blanks! Are you prepared to make use of the Cricut Hat Press for one thing aside from hats?! I’ve had enjoyable discovering Cricut Hat Press blanks that aren’t hats. I’ve tried quite a lot of totally different blanks to see which of them work finest so that you don’t need to. Learn on to see what works and what doesn’t!
Searching for extra info on the Cricut Hat Press? Discover my full Hat Press submit right here.
What Cricut Hat Press Blanks Work?
I actually just like the Cricut Hat Press, I’ve efficiently made a number of hats with HTV and sublimation simply with it. Whereas utilizing it, I couldn’t assist however think about different tasks that could possibly be made with the Hat Press. That’s what began the hunt for locating Cricut Hat Press blanks that weren’t hats!
After all, you should utilize all kinds of hats with the Cricut Hat Press, I’ve used visors, bucket hats, solar hats, and ball caps with the Cricut Hat Press. However what else would possibly work? As a result of the Hat Press has a particular curve to the plate it gained’t work with simply any clean. Discovering Cricut Hat Press blanks took a while and trial and error.
You possibly can watch me check out all these totally different blanks by clicking play on the video under:
Provides Used:
Listed here are all of the provides I used to create the Hat Press tasks.
Testing Blanks with the Cricut Hat Press
Earlier than really reducing or printing out any designs I wished to check totally different blanks to see if I assumed they’d work with the Cricut Hat Press. All of the blanks within the photograph under are sublimation blanks. They’re inflexible and too massive to slot in the Cricut Mug Press. As a result of they’re curved I assumed they’d be a superb choice for the Hat Press. Let’s see which of them work.
Hat Press and Giant Ceramic Mug
That is the Hat Press with a big ceramic mug. By wanting from the underside you may see how the Hat Press strains up with the mug. As you may see, little or no of the warmth plate really is available in contact with the mug itself. This isn’t an important candidate for the Hat Press. You would possibly as nicely use the EasyPress Mini as a result of the Hat Press isn’t contacting the floor any greater than it might.
Hat Press and Giant Sublimation Tumbler
The massive sublimation tumbler is much like the ceramic mug. Not a whole lot of the Hat Press plate is available in contact with the tumbler. Although the tumbler is bigger than the mug it nonetheless doesn’t match the curve of the Hat Press.
Cricut Hat Press and Sublimation Bowl
The sublimation bowl is basically shut. The curve is sort of proper for the Cricut Hat Press. You possibly can see that extra of the warmth plate of the Hat Press contacts the facet of the sublimation bowl. It’s nonetheless not completely proper although. The gaps alongside the ends would doubtless end in an imperfect completed product.
Blanks that Work with Cricut Hat Press
Now that we’ve reviewed blanks that don’t work with the Cricut Hat Press let’s have a look at some that do! I discovered a couple of gadgets that labored with the curve of the Hat Press. Each is a bit totally different so let’s break down easy methods to get the most effective end result with every one.
Cricut Hat Press and Sublimation Canine Bowl
This canine bowl is a sublimation clean. It’s bigger than the bowl we tried above and have a look at how nicely the curve of the Hat Press matches the bowl. The Hat Press makes full contact with the facet of the bowl from edge to edge which makes this an important choice.
The Cricut Hat Press on the third setting is sizzling sufficient for sublimation. Earlier than making use of my picture, I lint rolled the bowl to take away any mud or lint. Subsequent, I added my sublimation print and taped it down nicely with heat-resistant tape.
To ensure that this to work, I would like a sublimation print. That’s a picture printed on a sublimation printer with sublimation ink on sublimation paper. You possibly can’t simply use any picture printed from any printer.
As soon as my complete picture is taped down I’m going so as to add protecting paper excessive to guard the Hat Press from any of the ink which will switch whereas urgent. Use warmth tape to tape it down nicely.
My print is basically massive, a lot bigger than the Cricut Hat Press. To be able to ensure that my picture is pressed accurately, I’m going to carry the Hat Press in every location for the total press time. As a result of my print is bigger than the hat press the method is lengthy. I held the hat press in place, on the third setting, till the hat press beeped.
My print is way bigger than the hat press. I needed to press six instances, overlapping barely every time to verify every space of the print bought satisfactory warmth. It’s an extended course of and solely lined a couple of third of my bowl. If I wished to cowl the entire bowl, I must repeat the method again and again and it might take a extremely very long time.
Then, slowly take away the paper and the sublimation print, peeking beneath to see if it sublimates nicely. If it didn’t, it’s a lot simpler to put it again down and get it in the proper location in the event you’ve simply lifted it up sufficient to peek.
My sublimation regarded good after I peeked so I eliminated the sublimation print and butcher paper and the doughnut sprinkle print regarded wonderful. So there you may have a cute canine bowl with sublimation and the Cricut Hat Press. This was the one sublimation clean I may discover that I assumed would work with the Cricut Hat Press.
Cricut Hat Press and Stuffed Giraffe
I’m utilizing B-Flex HTV, it has a fast press time which is nice for these odd surfaces. I’ll attempt urgent onto the stomach of the stuffed giraffe. I extremely suggest utilizing heat-resistant tape to carry the HTV in place. Due to the rounded floor and the tender cloth, the sticky floor of the HTV doesn’t actually adhere nicely.
I at all times use protecting paper when working with any sort of odd floor. We don’t at all times know the fabric the stuffed animal is made out of and I don’t wish to threat melting it.
I’m utilizing the primary setting on the hat press for the stuffed giraffe. Maintain the hat press in place for about 4 seconds. My H is a bit tall for the hat press to cowl the entire picture without delay so I moved it round whereas urgent it.
You possibly can see extra about utilizing the Cricut Monogram Maker to make letters like this one right here!
Press for a couple of seconds after which test to see if the HTV has adhered to the giraffe. If it hasn’t, press once more for a couple of seconds. One other trick you may attempt for these odd surfaces is to take away the hat press after which use a scraper throughout the picture whereas it’s nonetheless sizzling. That helps to get a superb bond.
The B-Flex HTV is a sizzling peel, so I can peel up that provider sheet immediately and see if it’s caught. Then simply peel the provider sheet off of the undertaking.
One other trick for utilizing HTV on odd surfaces is to cowl the HTV again up with butcher paper or parchment paper upon getting eliminated the provider sheet and press it for only a couple extra seconds. That can stick any small edges down which may not be fully caught on the primary attempt. Then, simply raise that parchment paper again up, and you’ve got a cute stuffed animal prepared for some present giving.
Cricut Hat Press with Volleyball
I used to be actually excited to check out customizing totally different sports activities balls with the Cricut Hat Press. This rainbow volleyball match completely within the curve of the hat press.
To use the HTV, I trimmed the provider sheet actually near the HTV after which reduce slits within the provider sheet to assist type the HTV to the curve of volleyball. Use heat-resistant tape to carry the HTV into place.
Cowl the HTV with butcher paper to guard the floor and press with the Cricut Hat Press on the bottom setting.
I pressed for just some seconds after which checked the floor. I don’t know what the volleyball is made out of and don’t wish to soften it. Press for a couple of seconds ensuring to cowl all the HTV picture after which checked.
It really did begin to soften the volleyball a bit bit nevertheless it isn’t noticeable in any respect on the floor. It is a reminder to maintain checking and never press for too lengthy.
Peel again the provider sheet slowly on the nook to verify the HTV is caught down nicely. In my case, the HTV caught down very well. I eliminated the provider sheet and once more utilized the butcher paper and gave it yet another fast press to stay down any edges which will have lifted whereas eradicating the provider sheet.
The volleyball appears to be like wonderful and the HTV sticks nice on the floor. Truly, you may hardly really feel it on the floor. I simply added a few phrases to my volleyball. You would add a reputation or a workforce identify. There are tons of concepts for including HTV to balls, and the Cricut Hat Press is definitely good for this software. I’d positively choose one up in the event you’re enthusiastic about customizing some balls for workforce sports activities.
Cricut Hat Press with Soccer
I wished to attempt utilizing the Cricut Hat Press to use HTV to a soccer. To get the Hat Press to type to this inflated soccer I needed to push actually laborious to get it to adapt.
I did discover a soccer that comes deflated and has a white facet the place you may have teammates autograph it. As a result of it’s deflated, I can use the Hat Press type to assist make it form to the Hat Press.
A trick to getting the HTV to stay nicely to odd surfaces is to trim the provider sheet actually near the HTV. Lower little slits into the provider sheet to assist it type to the floor.
I like to make use of heat-resistant tape to carry the whole lot into place after which add parchment paper excessive. I attempted the second setting on the Hat Press with this HTV as a result of it’s a distinct model.
I’m simply holding the Hat Press onto the soccer. I’m urgent right down to attempt to get it to adapt to the form of the Hat Press and the hat type on the identical time. So I simply held it there for a couple of seconds, after which I observed it could be sinking a bit bit, so I lifted it up and I did soften the soccer. Nevertheless, the HTV did stick with the soccer.
You do run the chance of ruining these blanks if you end up experimenting. I didn’t know what this soccer is made out of. You don’t know if the parchment paper will shield the floor. Clearly, it didn’t on this case.
You would go down on the temperature and/or time. You would additionally attempt utilizing an HTV that takes much less time just like the B-Flex HTV. I solely had one soccer to experiment with. The HTV did stick very well, simply be sure you test usually so that you don’t soften the soccer.
Closing Ideas on Discovering Cricut Hat Press Blanks
I used to be actually comfortable that I used to be capable of finding no less than a couple of issues that may work with the Cricut Hat Press that aren’t hats. I hope you discovered from a few of my errors, be sure you begin with a low temperature and at all times use a protecting sheet to guard your clean from melting.
Make sure you take your time with massive sublimation blanks and prints. For those who take your time and test issues nicely earlier than eradicating the provider sheet, you’re more likely to actually get pleasure from your closing undertaking. If in case you have any questions on discovering Cricut Hat Press blanks that aren’t hats and utilizing them, don’t hesitate to depart them within the feedback.
#Discovering #Cricut #Hat #Press #Blanks #Hats